Monthly Archive: May 2019

0

Needle Cut & Holes in Garments

Holes and needle cut is a commonly faced problem during garment manufacturing. Specially the garments with knit/jersey fabric, lightweight fabrics, a combination of lightweight/jersey fabric with heavy woven fabric are exposed to a higher risk of getting needle cut or holes during the production process. Wrong selection of machinery, needle, poor Garment handling during the manufacturing process and Extensive washing...

0

Sweater: History and Morden Manufacturing

Sweater, outer garment, usually knitted or crocheted, worn on the upper part of the body, either over the head or with buttons on the front or back. Although woolen fabrics had been practiced by hand for about 2,000 years, it was not until the fifteenth century that the first knitted shirts or tunics were produced on the Channel Islands of...

0

Down Jacket Basics Part -1

As you are already aware that A down jacket has been insulated with the soft feathers from duck or geese. Down is a very good insulator as the fluffiness of down creates thousands of tiny air pockets which trap warm air and retain heat, thus helping to keep the wearer very warm in cold winter weather. Read More: Down Jacket...

0

Quality Assurance Vs Quality Control

What is Quality Assurance? Quality assurance can be defined as part of quality management focused on providing confidence that quality requirements will be fulfilled. All the planned and systematic activities implemented within the quality system that can be demonstrated to provide confidence that a product or service will fulfill requirements for quality. In quality assurance approach you need to inspect...